Rework kit mk2 for Logitech BRIO 4K Pro web camera. It allows using full advantage of CS-mount or C-mount lenses and filters.

Included parts

  • Hex keys
    • M2x20x83
    • M1.5x17x75
  • Screws
    • DIN912 M1.6×4 – 6 pcs (for PCB mounting)
    • DIN912 M2x3 – 2 pcs (for microphones)
    • DIN912 M2.5×8 – 4 pcs (for enclosure)
    • DIN912 M2.5×10 – 2 pcs (for enclosure)
  • Two aluminum enclosure parts
Change list (mk1 vs mk2)

  • Added threaded holes for USB-C lock cable
  • Larger pockets for microphone wires for easier assembly
  • Larger opening for a sensor - allows use of short back-focal lenses with M12 lens adapter
  • Chamfered edges - small cosmetic change and weight saving

Rework instructions and resources

Notes

  • This is DIY part set (if kit only option is selected). Buyer must have soldering knowledge, skills, tool and material set for disassembling and assembling these cameras
  • Detailed description, overview and sample pictures check blog post
  • Due do obfuscated nature of Logitech product naming, if reworked camera is ordered it is possible you will get older, newer, stream or any other version. Please contact us if you need specific version
  • Reworked cameras are not stocked and made to order! Lead time can vary from 1 to 3 weeks, but in some cases it can be on stock. Please contact if your timing is critical before placing order
  • Lens is not included
  • Filter selection notes

Write a review

Note: HTML is not translated!
    Bad           Good

Logitech BRIO 4K Pro rework kit mk2

  • Product Code: BRIO_REWORK_KIT2
  • Availability: Back-order
  • 60.00€


Available Options


Related Products

OUT OF STOCK
C920/C922/C930 enclosure kit for CS-type lens mk2

C920/C922/C930 enclosure kit for CS-type lens mk2

The new version of the C920 camera rework kit. It enables the use of C and CS-mount lenses with a co..

58.00€

2.8-12mm CS lens (5MP)

2.8-12mm CS lens (5MP)

Universal lens with manual focus, zoom and iris for CS cameras. Suitable for high pixel density sens..

53.00€

OUT OF STOCK
Customer BRIO camera rework fee

Customer BRIO camera rework fee

This is the fee when customer sends us his own Logitech BRIO camera. Case, filters, lens and all oth..

20.00€

USB-C USB cable 1.5m (with lock screws)

USB-C USB cable 1.5m (with lock screws)

Double shielded customized USB USB-C cable with lock screws. FeaturesData wires: AWG32Power wires: A..

19.50€

IR CUT filter (for C1 and  C1 PRO cameras)

IR CUT filter (for C1 and C1 PRO cameras)

This filter is manufactured for C1 and C1 PRO cameras but can be used for all other applications (li..

16.00€

Longpass filter (for C1 and C1 PRO cameras)

Longpass filter (for C1 and C1 PRO cameras)

NIR (Near Infra Red) filter is manufactured for C1 and C1 PRO cameras but can be used for all other ..

19.50€

PREORDER
Screw in low profile NIR filter for CS and C-mount cameras

Screw in low profile NIR filter for CS and C-mount cameras

Screw in low profile NIR filter for CS and C-mount cameras. Designed to be used between a sensor and..

35.00€

PREORDER
Screw in low profile IR-CUT filter for CS and C-mount cameras

Screw in low profile IR-CUT filter for CS and C-mount cameras

Screw in low profile IR-CUT filter for CS and C-mount cameras. Designed to be used between a sensor ..

35.00€

PREORDER
USB-C right angle cable 2m

USB-C right angle cable 2m

Customized USB-C right angle cable. FeaturesData wires: AWG28Power wires: AWG24Shielding: Foil + wir..

12.00€

Tags: Brio, rework, kit, CS lens, DIY